Cisco Deploying Basic Wireless LANs V1.2 (WDBWL)


Cisco Deploying Basic Wireless LANs V1.2 (WDBWL)

What you’ll learn in this course

The Cisco Deploying Basic Wireless LANs V1.2 (WDBWL) course is designed to give you a firm understanding of the Cisco Unified Wireless Networking for enterprise deployment scenarios. In this course, you will learn the basics of how to install, configure, operate, and maintain a wireless network, both as an add-on to an existing wireless LAN (WLAN) and as a new Cisco Unified Wireless Networking solution. This course will build on top of Wireless LAN terms, concepts, protocols, architecture, and Wireless LAN Characteristics introduced in the Wireless LAN Essentials eLearning course. In this course you will investigate the components, features, and deployment aspects of the system. You will have the opportunity to reinforce what you learn with hands-on labs. This course focuses on the essential network elements of a WLAN: the access points (APs) and wireless LAN controllers (WLCs). This course provides high-level information about the optional but recommended network management and services appliance components of a Cisco Unified Wireless Network – the Cisco Prime Infrastructure (PI), and Mobility Services Engine (MSE)—but does not provide hands-on labs and in-depth coverage of these components. The Cisco management platform and MSE are covered in more depth in a separate course, Managing Cisco Wireless LANs (WMNGI).

How you’ll benefit

The Cisco Deploying Basic Wireless LANs (WDBWL) v1.2 course is designed to give you a firm understanding of the Cisco Unified Wireless Networking for enterprise deployment scenarios.

Who should enroll

This course is designed for engineers involved in the planning, deployment and managment of enterprise WLAN using both autonomous architecture and lightweight access points with controllers.

· Channel Partners

· Customers

· Employees

Course Prerequisites

The knowledge, skills, and attitudes that a learner is expected to have before attending this course are as follows:

· Prior completion of the Cisco Wireless LAN Essentials eLearning course

· Knowledge of basic networking principles, TCP/IP, bridging, routing protocol, and VLAN operation

· Cisco CCNA® certification or equivalent work experience

· Basic Microsoft Windows, Windows networking, and Internet browser navigation skills

Course Objectives

Upon completing this course, the learner will be able to meet these overall objectives:

· Differentiate the characteristics of a unified wireless LAN architecture, and configure and test the controllers, access points, and basic features

· Differentiate the characteristics of a FlexConnect architecture, configure and deploy a FlexConnect based wireless LAN

· Perform routine maintenance, network monitoring, and common troubleshooting tasks on the Cisco wireless LAN

· Describe and perform configuration with Cisco’s new Ease of Use wizard, and best practices audit

Course outline

Module 1: Unified Deployments

· Lesson 1-1: Performing the Initial Wireless LAN Controller Configuration

· Lesson 1-2: Describing Unified AP Modes of Operation

· Lesson 1-3: Understanding the AP Association Process

· Lesson 1-4: User Interfaces to the System

· Lesson 1-5: Radio Resource Management and CleanAir

· Lesson 1-6: Administering WLANs and AP Groups

· Lesson 1-7: Configuring Mobility Groups and Roaming

· Lesson 1-8: Configuring Security Options

· Lesson 1-9: Performing General Administration

· Lesson 1-10: Providing Guest Access

Module 2: Deploying The FlexConnect Architecture

· Lesson 2-1: FlexConnect Deployments

· Lesson 2-2: FlexConnect Configuration and Operation

· Lesson 2-3: 8.1 FlexConnect Enhancements

Module 3: Maintaining and Troubleshooting a Cisco Wireless LAN

· Lesson 3-1: Performing Routine Maintenance

· Lesson 3-2: Configuring Policies and Management

· Lesson 3-3: Gathering Data

· Lesson 3-4: Troubleshooting in a Cisco Unified Wireless Network

Module 4: Cisco User Interface Enhancements

· Lesson 4-1: Ease of Use Features

Module 5: Appendix

· Lesson 5-1: Cisco Wireless LAN Essentials Refresher

· Lesson 5-2: Pre-Deployment Planning

· Lesson 5-3: Autonomous Deployments

Lab outline

Automate Networks with Netmiko

· Lab 1-1 Perform the initial controller configuration

· Lab 1-2: Unified AP Modes of Operation

· Lab 1-3: AP Association Options

· Lab 1-4: Controller Web Interface

· Lab 1-5: RRM and CleanAir Configuration

· Lab 1-6: Configuring Security parameters on the WLC

· Lab 1-7: AVC Configuration

· Lab 1-8: Configuring Guest Access and Web Authentication

· Lab 2-1: FlexConnect Local Switching

· Lab 4-1: Perform the initial controller configuration using Ease of Use wizard


Instructor-led training: (3) days


To consult

Cisco Learning Credits

To consult



Skill level



Parents, students and community members are invited to attend this meeting, which discusses educational issues at the high school and its middle and elementary schools. Schools in the Kerrington cluster are: Aldiger, Caramba, Chesterfield, Cutterey, Fraiser, Johnson, Antonio, Lorney Winston, Ramos, and Westford secondary schools

Download pdf Download doc
Apúntate al curso AHORA

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies.

Aviso de cookies